I would like to split my 30 channels of my E1, 10 for origination and 20 for termination. I have an AS5300. Can someone send me the configuration to do that. ? The issue is that the telophony company that sells us the E1 service gives us channels only for origination or termination, separately. Channels are not going to be both for origination or termination. Thats why I don´t want the AS5300 to send a termination call through a channel that is only for origination, Please help me with this configuration.
I think you can use tow ds0-group, or cas-group (depend on IOS version), then you will see two voice ports like; 1/0:1, 1/0:2, then config to two "dial-peer voice xx pots", the one for termination looks some specaill, 'the destination pattern" can use some num pattern that you won't used, eg only '11', then added "foward digital all"
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.