Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Question about hardware and vg248

hello ,

I have a situation where we need a traveling phone system . Our situation is unique . It would be based in a trailor and travel to other places . We would give the local phone company the info a few weeks in advance and verify Digital connectivity ...PRI for inbound/outbound and we would also have analog access via fxo.

To accomplish we want to use the ics7750 running 3.1

accompanied by the vg248 .. My question is the functionality between the 7750 and the vg248 skinny gateway .. Can someone shed some light on this ..

will i walk myself into a headache ..what is its compatibility

thank you

jkoniecki@home.com

1 REPLY
Cisco Employee

Re: Question about hardware and vg248

Well, the ICS7750 won't run CallManager 3.1 until the next release of ICS7750 software comes out in a month or two. However, once it is running CallManager 3.1, the VG248 will work with it just like it would work with any other CallManager 3.1 system.

If you have specific questions let me know.

82
Views
0
Helpful
1
Replies