Under the old 4.x model you were able to split the roles of you CCM's without a license penalty.
eg. I have 3 servers licensed but I actualy have 5 servers in the cluster 3 servers running all services except TFTP and IPVMS 2 servers ONLY running TFTP and IPVMS.
This was totaly valid under the license rules for 4.x but now with 6.x there is license enforcement so what I want to know is can I run the same cluster above with only 3 node licenses or will I need to have a full node license for the 2 boxes only doing TFTP and IPVMS?
I am posing this question through my local Cisco guys but thought someone else may have run into it. Any help would be great.
AFAIK the CCM node license is only required for the CUCM service. in my lab i have 2 servers, if i shut down the CCM service in the SUB and go to license viewer i get 2 licensed nodes, 1 used and 1 available.
the CCM node license refers to a node in which you will be doing call processing or in which you will have the service running as a backup server.
the TFTP service should not require the license but to be honest i'm not sure if it's required to run IPVMS. according to the test i did in my lab it should not be, since the only service i stopped was the CUCM service and all the others kept running.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...