On a 7937 there are two ports for the additional microphones. Is it possible to input a sound signal directly to the 7937 and does Cisco make a converter cable for this purpose? For example, a laptop headphone jack could be connected directly. It would probably have to be a digital signal instead of analog so, a laptop with an SPDIF output could be connected directly to the 7937? My thoughts were for use as a quick PA system in a pinch.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...