Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

question with callmanager installation on other hardware

when i completed the cmm 3.1(4b) installation,found the callmanager services not working,

here's the log form event viewer:

Event Type: Error

Event Source: Service Control Manager

Event Category: None

Event ID: 7031

Date: 9/2/2003

Time: 1:39:23 PM

User: N/A

Computer: HNEP-32E6FA7F61

Description:

The Cisco CallManager service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.

anybody any suggestion?

thanks

1 REPLY
Silver

Re: question with callmanager installation on other hardware

Is it an upgrade or a fresh installation? If it is an upgrade then the error can occur if something goes wrong during installation or it gets installed with errors. In this case, you might need to un-install and then re-boot and then re-install the CCM again. If it is a fresh installation, then I wonder what might have gone wrong.

95
Views
0
Helpful
1
Replies
CreatePlease to create content