Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

"9" to get a dial tone

We are about to deploy a CallManager 4.1. All users will have their own DID. How do I specify in CallManager that the users have to dial 9 to get a dial tune and in order to call outside.

Thanks.

3 REPLIES
Blue

Re: "9" to get a dial tone

Create a "Route Pattern" of 9.@, check the "provide secondary dial tone", and finally select the "PreDot" from the strip digits for the called number.

please rate posts.

andy - berbee

New Member

Re: "9" to get a dial tone

Would it be the same proces, if we wanted to use "1" instead of "9"?

Blue

Re: "9" to get a dial tone

Well sure, you could create a route pattern of 1.@ but 9 is generally accepted as the "outside access" number but its really personal preference.

please rate posts.

andy - berbee

93
Views
5
Helpful
3
Replies