Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

"low bandwidth" displayed on the phone???

Anyone know what triggers this? we have a remote site that the phones are displaying this randomly. I havent checked the router yet to see if something is going, but the sniffer is saying there is plenty of bandwidth. I do have a few problems that would relate to low bandwidth, but is there a place in CCM to verify this?

2 REPLIES
Green

Re: "low bandwidth" displayed on the phone???

Hi,

http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K18248657

After checking all that I would Hard set the speed & duplex on the switches and NICs on the CMs as well as the gateways involved.

HTH

//G

Blue

Re: "low bandwidth" displayed on the phone???

this would be provided to the phones based on the 'location/region' configuration of the phone and the fact that CCM believes the bandwidth allocated is currently low.

verify the region(s) codecs in use then use that to verify the location provides enough bandwidth for the simultaneous number of calls you need.

271
Views
0
Helpful
2
Replies