Users must dial a 5 digit pin at the end of the number to make long distance calls. However, the Directory of placed calls shows employee's PIN as part of the string. Does anyone see a way around this?
There is a very old phone load (came with 3.0) that nicely hides the user pin by replacing it with the prefix digits of the route pattern. Bad news, phone load does not work with CCM3.2. We currently have a case open requesting this "feature" be added back... maybe with enough requests we can get a custom phone load written for PIN and "security risk" applications involving placed calls directory.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...