Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

R2 Signaling

Hi,

I am deploying a public voice network over IP and I would like to know if R2 signaling is reliable enough to provide public telephony services.

My basic figure of the network is:

National PSTN ---- PBX ----- AS5300 ----- 2600 ---- International PSTN (Voip Cloud)

Thanks in advance.

Regards

Milton

1 REPLY
Cisco Employee

Re: R2 Signaling

R2 works fine, the problem is that there are so many flavors of R2 that it can be difficult to match the local PSTN or PBX that you are connecting to. If you have a choice, go with PRI, if not make sure that you know the exact flavor of R2 that is being used and what that means in gateway configuration terms.

R2 theory:

http://www.cisco.com/en/US/partner/tech/tk652/tk653/technologies_tech_note09186a00800943c2.shtml

on the 5300:

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1827/products_feature_guide09186a00800dc5cf.html

on the 26/3600:

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1830/products_feature_guide09186a00800873eb.html

config and tshooting:

http://www.cisco.com/en/US/partner/tech/tk652/tk653/technologies_configuration_example09186a00800ad389.shtml

105
Views
0
Helpful
1
Replies
CreatePlease to create content