Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Radius VSA in IOS 12.2(11)T

Have several voice features added in IOS 12.2(11) like the inclusion of news VSA pairs with good info about voice sessions. All this new and interesting values are sent to radius with the same Decimal VSA Value (1). This overlap cannot permit the correct radius-server reception, all the values have the same VSA Number.

suggestions ?

3 REPLIES
Bronze

Re: Radius VSA in IOS 12.2(11)T

I found this document that explains Cisco's implimentation so I hope it helps. http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/vapp_dev/vsaig3.htm#xtocid0

Community Member

Re: Radius VSA in IOS 12.2(11)T

Thanks for your post, i know this document but i need a way to differentiate the pairs sent with the same VSA number. Ej: lost-packet Vs. round-trip-delay when its arrives into the radius with VSA 1. For what reason Cisco send this interesting values overlaped in VSA decimal 1 ?

Thanks

Ezequiel

Community Member

Re: Radius VSA in IOS 12.2(11)T

IOS 12.2(13)T still suffers from this, I have the same problem because

I'm using xtradius and accesing the VSA values via environment variables.

A possible workaround would be to access the VSA values in some other way, i.e. hooking some code into xtradius source, this way should be possible to differentiate the pairs thanks to the "attribute=\"attribute=value\" " feature.

I'll tell if I find something more, regards.

93
Views
0
Helpful
3
Replies
CreatePlease to create content