Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Recommend IOS and CME Version?

Running a 2621XM, 12.4.4T, CME 3.4, two port FXO and 2 port FXS.

I have static on all calls when I speak into the reciever. Other end is very clear and they do not hear static.

Is there a solid IOS version and CME version to run that is fairly bug free?

2 REPLIES

Re: Recommend IOS and CME Version?

Can you paste a sh voice dsp output

New Member

Re: Recommend IOS and CME Version?

DSP DSP DSPWARE CURR BOOT PAK TX/RX

TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABORT PACK COUNT

==== === == ======== ======= ===== ======= === == ========= == ===== ============

C542 001 01 None 6.3.2 IDLE idle 0 0 1/0/0 NA 0 844/868

C542 002 01 None 6.3.2 IDLE idle 0 0 1/0/1 NA 0 596/593

C542 003 01 None 6.3.2 IDLE idle 0 0 1/1/0 NA 0 1331114/1332

915

C542 004 01 None 6.3.2 IDLE idle 0 0 1/1/1 NA 0 41235/41926

edsp 001 01 g711ulaw 0.1 IDLE 50/0/1.1

edsp 002 01 g711ulaw 0.1 IDLE 50/0/2.1

edsp 003 01 g729r8 p 0.1 IDLE 50/0/3.1

edsp 004 01 g711ulaw 0.1 IDLE 50/0/4.1

edsp 005 01 g711ulaw 0.1 IDLE 50/0/5.1

edsp 006 01 g729r8 p 0.1 IDLE 50/0/6.1

edsp 007 01 g711ulaw 0.1 IDLE 50/0/7.1

edsp 008 02 g711ulaw 0.1 IDLE 50/0/7.2

edsp 009 01 g729r8 p 0.1 IDLE 50/0/8.1

edsp 010 02 g729r8 p 0.1 IDLE 50/0/8.2

132
Views
0
Helpful
2
Replies
CreatePlease to create content