Rejecting calls w/o CLID

[ananddiwakar]

Hie Everybody,

Do we have any facility in CCM where if a call comes w/o CLID then CCM will reject the call. And will play some announcement to the caller

The CCM version is 3.3 in this case.

I am not sure about this but could not find anything as of now.

[tbramwe]

If you are using h.323 then number translation is an option at the gateway level or reject translation.

http://www.cisco.com/en/US/customer/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml#intro

For MGCP I do not believe there is a way to block inbound calls w/o ANI.

Hope that helps.

Tom