I have a problem with replacing CCM servers and need your help:
As instructions from Cisco, I'd installed the same CCM version on the new server; backup the old server; turn off the old server, connect the new one to the network and then restore the .tar file to the new server. But after 4 times of trying, the process still failed at the CMDB restore step.
Could anyone give me a suggestion on this and some ideas on replacing the CCM servers!
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...