I have just installed a Unity 3.0.3 in Spanish, but the Win2000 and exchange2000 are in US. The trouble is that none of the reports work. SOME OF the errorS that comes up are<br><br>REPMGR RUNMODULE ERROR REPORTID 3 MODULE PREPROCESS HRESULT 0X80004005.<br><br>REPMGR RUNMODULE ERROR REPORTID 4 MODULE CRUNCH HRESULT 0X80004005.<br><br><br>Can you help.<br><br><br>
You could be running into language issues. I am assuming that you have only one Unity lanaguage installed on the system, that being Spanish. Reports needs a bunch of resource files to run in the particular language. But the language that the report runs in is being fed from the SA. Thus if you are running your SA in English, the reports will try and run in English and that will cause problems on your machine as you do not have the English files. If you are running the reports from an English SA, try and change your SA language to Spanish and try and run the reports.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...