I am not on a call Manager right now, but if I remember correctly, there is also a file in the area of the .raw files that lists all of the ring tones and their names for selection download. If you have gotten rid of the .raw files, if you choose one that is not there, you will probably get an error.
The RingList.xml file defines an XML object that contains a list of phone ring types. Each ring type contains a pointer to the PCM file used for that ring type and the text that will be displayed on the Ring Type menu on a Cisco IP Phone for that ring. This file is located in the C:\ Program Files\Cisco\TFTPPath directory of the Cisco TFTP server for each Cisco CallManager.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...