Is there a way to ring the second line on 7960( for operator)when a call is forwarded from first line?I know we can change the configuration on secondline in the CCM to make it ring once or ring , but I tested this is only useful when you call the second line directly not forwarded from first line. Thanks
I'm not sure what the question is. What versions of Cisco CallManager are you using? In general, on a 3.3(3) and 4.0(1) system you should be able to forward your first line to a second line on the same phone.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...