Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Route Filter, Route Pattern Question

We have a route pattern 9.@ with a route filter of Local Office Codes:

END-OF-DIALING DOES-NOT-EXIST AND OFFICE-CODE == 554) OR

(END-OF-DIALING DOES-NOT-EXIST AND OFFICE-CODE == 444) OR

(OFFICE-CODE == 443 AND END-OF-DIALING DOES-NOT-EXIST) OR

(OFFICE-CODE == 898 AND END-OF-DIALING DOES-NOT-EXIST)

If a user dials 94438981 there is a interdigit timeout...I understnd this is because Call manager picks up the 898 as a office code and it waiting for 3 more digits...even if I change the Route Filter to Area Code does not exist I still get the interdigit timeout...is there a way to resolve this issue...

Thanks,

Joe Harbison

3 REPLIES
Green

Re: Route Filter, Route Pattern Question

Hi Joe,

You need to add LOCAL AREA CODE does not exit to that filter.

New Member

Re: Route Filter, Route Pattern Question

That appeared to have worked....Does the Local Area code not exist tell it that it is only 7 digit dialing? I had added that the area code does not exist but not the Local Area code...

Thanks for your help...

Green

Re: Route Filter, Route Pattern Question

That is correct when you use that option you are restricting to dial 7-digit Local calls

YYY - XXX - XXXX , YYY is the Local Area Code

1 ZZZ - XXX - XXXX ZZZ is the Area Code

151
Views
5
Helpful
3
Replies
CreatePlease to create content