Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Route Group Port Balancing

I'm running CCM 3.3(2)spC and have 2 VG200`s, each with 4 FXO ports. They are both running MGCP so I have granular port allocation. These 2 VG200`s are the gateways to cellular dialers with a allocated amount of call minutes on each per month. I need to be able to load balance (round-robin style) on each of these ports in order to take advantage of each cell dialers minutes. Is this possible in the route group configuration? So far I can only set the order in which it uses the ports if they are in use.

Any info would be appreciated, Thanks.

1 REPLY
Silver

Re: Route Group Port Balancing

In the Route Group, select all these four gateways (voice ports) and set their order to 1. Go to CallManager service parameter, and select True for Reorder Route List.

Thanks,

Partha

96
Views
0
Helpful
1
Replies