Have a customer that has the following configuration and I want some conformation that it is working the way the customer thinks it is. We did not create this and one thing is that we will be moving them to MGCP in the future.
Route Pattern points to a Route List
Route List points to Route Group A and then Route Group B.
Route Group A has one H.323 Gateway, AA
Route Group B has two H.323 Gateways, BA & BB
All Gateways are PRI
1) Will Call Manager ever get notification if there are no available ports in the AA Gateway?
2) If the above answer is yes, How long will it take for Gateway AA to tell Call Manager?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...