Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Route Pattern Limitation

In earlier versions of CallManager there was a limitation of the number of route patterns that you could have. I know that this has been changed. Does any one know what the upper limits is now ?

Adam

2 REPLIES
Silver

Re: Route Pattern Limitation

I don't see any such limitation existing now.

New Member

Re: Route Pattern Limitation

On CCM 3.1, if you use the @ in your route patterns, you can get about 300 in before it causes serious problems. After 300, if you add or update any route pattern the CPU will hit %100 for about 1 minute and sometimes CCM service will quit. You can insert a longer database initialization time in the service parameters and get about 1000 route patterns in, but each add will take down the service and you will have to do on off-hours. If you don't use the @ in your route pattern, it doesn't seem to cause problems although CPU will still spike for a few seconds when updating route patterns. Have not tried 3.2 with 1000 route patterns yet.

107
Views
0
Helpful
2
Replies