Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Route Pattern Question

I have a site that operates a little stranger than I am used too. Within the 727 area code, there are certain exchanges that require 7 digit dialing,while others require 10 digit dialing, and some even 11 digit dialing.

Is there anyway to create route patterns to recognize this, other than creating specific route patterns for each NXX that requires 11 and 10 digit dialing

1 REPLY
Hall of Fame Super Silver

Re: Route Pattern Question

You can use route filters to achive this, where you would have a local RF that would say something like

LOCAL-AREA-CODE == 111 OR LOCAL-AREA-CODE == 222 OR .....

or use wildcard masks in the route patterns, modiffing the following :

9.[2-9][02-9]XXXXX - local 7 digit

9.[2-9]X[02-9]XXXX - local 7 digit

9.[2-9][02-9]X[2-9]XXXXXX - local 10 digit

9.[2-9]X[02-9][2-9]XXXXXX - local 10 digit

9.1[2-9][02-9]X[2-9]XXXXXX - long distance

9.1[2-9]X[02-9][2-9]XXXXXX - long distance

Chris

105
Views
0
Helpful
1
Replies