Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Route Patterns for CCM in Auckland, New Zealand

Is there a standard for Route Patterns in CallManager for Auckland, New Zealand? I have a listing which I put together, but wanted to verify that against any other list which may exist.

5 REPLIES

Re: Route Patterns for CCM in Auckland, New Zealand

This may help

http://en.wikipedia.org/wiki/Australian_telephone_numbering_plan

Sankar

PS: please remember to rate posts!

New Member

Re: Route Patterns for CCM in Auckland, New Zealand

Thank you for the information, however, the information you provided is for Australia, not New Zealand. Do you have any recommendations for New Zealand? Thanks in advance.

Re: Route Patterns for CCM in Auckland, New Zealand

Here is it.

http://en.wikipedia.org/wiki/Area_code#New_Zealand

Sankar

PS: please remember to rate posts!

New Member

Re: Route Patterns for CCM in Auckland, New Zealand

Re: Route Patterns for CCM in Auckland, New Zealand

Dial plans are great to work with, as long as people understand route filters appropriately. Dial plan may look very simplified, but complex to troubleshoot if you use a combination of 9.@, install a numbering plan for the country you are in and route filters.

If you install the numbering plan for NZ, (or any country) make sure you do this first on publisher (will require reboot) and then on all the subscribers.

HTH

Sankar.

PS: Please rate posts!

262
Views
7
Helpful
5
Replies