Router 1721, CME, IPPHONE, which wic? for pots connection

[gael.clavadetscher]

Hello,

I have a 1721 router with no WIC interface yet.

I would like to have IPPHONES on the LAN but only one connection to the POTS.

If I buy:

1 WIC-ADSL for Internet access and

1 WIC for Pots connexion.

Will it be sufficient?

And which WIC should I buy for POTS access?

Many thanks.

Gael

[spremkumar]

Hi

I feel u need to check something inline with VIC-2FXS interface card which can get u connected directly to the POTS.

do refer this link about the compatability and the specifics of the same..

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a0080094fac.shtml

if u r talking about interfacing EPABX then i would suggest for an E&M card instead of FXS.

regds

[peter.rowe]

the 1721 does not support VIC's - you'll need at least a 1751-V to do IPT. But the new 2800 series are far superior and have loads more RAM...

p.