Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Routing Issue?

Hello all...i have a wierd issue...

I have a hunt group pilot 1099...when i dial from the phone i get fast busy..i use the digit analyzer and it says it should be routing this pattern?

I also have a meet me conf number 121212...when i dial it from a phone i also get fast busy..dial number analyzer says block this pattern? Why?

Note in both cases the Line 1 on the phone has access to all internal DNs so there shouldnt be an issue with CSS/partitions?

Calling Party Information

Calling Party = 1000

Partition = PT_users

Device CSS = CSS_Users

Line CSS = CSS_All

AAR Group Name =

AARCSS =

Dialed Digits = 1099

Match Result = RouteThisPattern

Matched Pattern Information

Pattern = 1099

Partition = PT_users

Time Schedule =

Called Party Number = 1099

Time Zone = (GMT-05:00) Eastern Time (US & Canada)

End Device = Huntgroup1-htlst

Call Classification = OnNet

InterDigit Timeout = NO

Allow Device Override = Disabled

Outside Dial Tone

PlayedAfter = 109

Results Summary

Calling Party Information

Calling Party = 1000

Partition = PT_users

Device CSS = CSS_Users

Line CSS = CSS_All

AAR Group Name =

AARCSS =

Dialed Digits = 121212

Match Result = BlockThisPattern

Called Party Number =

Matched Pattern Information

Pattern = 121212

Partition = PT_users

Time Schedule =

Pattern Type = MeetMe Conference Number

Time Zone =

InterDigit Timeout = NO

Allow Device Override = Disabled

Outside Dial Tone = NO

Call Flow

Note: Information Not Available

Alternate Matches

Note: Information Not Available

TIA!!!!!!!!!

1 REPLY
New Member

Re: Routing Issue?

This is the error message im getting the CM trace file when dialing the Meet me Conference number (a CM server reboot fixed the huntgroup) the meet me still shows up as blockthispattern under dial number analyzer...

10/09/2006 22:02:58.419 CCM|ConnectionManager - wait_AuDisconnectRequest(16777250,0): NO ENTRY FOUND IN TABLE|<:STANDALONECLUSTER><:192.168.35.1><:1><:192.168.35.10><:SEP0008210F8AE2>

10/09/2006 22:03:51.967 CCM|ConnectionManager - wait_AuDisconnectRequest(16777252,0): NO ENTRY FOUND IN TABLE|<:STANDALONECLUSTER><:192.168.35.1><:1><:192.168.35.10><:SEP0008210F8AE2>

10/09/2006 22:11:58.573 CCM|ConnectionManager - wait_AuDisconnectRequest(16777254,0): NO ENTRY FOUND IN TABLE|<:STANDALONECLUSTER><:192.168.35.1><:1><:192.168.35.10><:SEP0008210F8AE2>

10/09/2006 22:12:12.729 CCM|ConnectionManager - wait_AuDisconnectRequest(16777258,0): NO ENTRY FOUND IN TABLE|<:STANDALONECLUSTER><:192.168.35.1><:1><:192.168.35.10><:SEP0008210F8AE2>

262
Views
0
Helpful
1
Replies
CreatePlease to create content