cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
190
Views
0
Helpful
1
Replies

RSVP on the 6509

partha
Level 1
Level 1

Hi,

We are trying to configure RSVP on our Cisco Catalyst 6509 switch. We

are using IPTV to test the configuration. We enabled RSVP on each of the

VLANs by using the 'ip rsvp bandwidth 10000 1024" command for that VLAN. The

RSVP service is being denied to streams that require more than 1024kbps as

in the above configuration.

However, we found that upon congesting the network we get a best effort

transmission even after the flow is allowed to use RSVP reservation.

Is there anything more we need to do on the switch side in order to get

RSVP to have priority over ordinary traffic? Anything on the switch module?

Thanks,

Partha.

P.S.: We do not run any COPS/PDP servers.

1 Reply 1

ciscomoderator
Community Manager
Community Manager

Often times complex configuration issues are best addressed in an interactive session with one of our trained technical assistance engineers. While other forum users may be able to help, it’s often difficult to do so for this type of issue.

To utilize the resources at our Technical Assistance Center, please visit http://www.cisco.com/tac and to open a case with one of our TAC engineers, visit http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.