How can I find a fresh copy of the SAweb. It seems somebody hacked the SAweb. Everytime one tries to open you get a test message that somebody wrote. I need to put the original page back to its place. Where do we store tese asp or html files.<br><br>Sean Poure<br>NEC-Voice Engineering<br>Sr. Systems Engineer<br>714 4846275<br>
You'll find almost all the SAWeb files under the SAWeb directory on CD #1 (the files and directory stucture is identical to what's installed on your HD under the inetpub\wwwroot\saweb directory).
The only files on the HD (under wwwroot\saweb) that don't come from the SAWeb directory on the CD is the "localizationFiles" directory. You'll find this under the Localize\SAWEB\ENU\SAWeb directory on CD #1. Again, the directory and files under here are identical to the wwwroot\saweb\localizionFiles on the hard drive.
Yes, you can copy over them on the hard drive and it should bring your pages back to normal... just be careful to copy to the right place.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...