I want to implement a session border controller, will it work if I use a Cisco 12008 Router? Below are the ff specs. or do I need a separate card for this purpose? And what is the latest version of IOS and feature sets do I need to serve my objectives. Thank you in advance, and your immediate response would much likely appreciated.
Cisco 12008 Router Specs:
Qty Part Numbers(s) Description
1 GSR8/40 CISCO 12008 GSR 1CSC, 3SFC, 2 DC POWER
2 GRP-B= ROUTE PROCESSOR, 128MB AND 20MB FLASH, ECC SUPPORT, SPARE B
1 3GE-GBIC-SC GSR12000 THREE-PORT GE LINE CARD, USED
1 8FE-TX-RJ45 8-PORT 100BASETX, RJ45 CONNECTOR TYPE, VERSION, USED
3 WS-G5486 CISCO SYSTEMS WS-G5486 1000BASE-LX/LM, "LONG-HAUL" GBIC
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...