Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

secondary number in ephone-dn

Hi All,

I am using CME 4.1 with PRI connection. all ephone-dn are dual line with secondary number. I can't define dialplan-pattern becasue DID with extension is not match.

ephone-dn 1 dual-line

number 337 secondary 9495025006

when I make a outbound call to PSTN, CME sends 337 instead of DID, therefore call fails. is there any way to send DID to PSTN without to change the order of extension and DID in ephone-dn? because there are lots of ephone-dn and take forever to change this order.

thanks

Alex

3 REPLIES
Hall of Fame Super Gold

Re: secondary number in ephone-dn

If you want them to send PSTN number then you need a translation rule, and / or num-expan.

New Member

Re: secondary number in ephone-dn

thanks for your reply,

I can't use num-exp because DID with extension is not match, for example 327 as extension and 9495025007 as DID. also If I want to use translation-rule, I have to define 155 translation rule for each ephone-dn. is there any other way to tell to CME send secondary number (DID) as calling number?

thanks

ALex

Hall of Fame Super Gold

Re: secondary number in ephone-dn

As far as i know, there is no way.

1123
Views
0
Helpful
3
Replies
作成コンテンツを作成するには してください