Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

security on IP phones

I have a IP phone network,where i want to give security for few users who are having international dialing facility.those users are already added to a specified partition and calling search space,with a commong FAC.Can i give unique FAC for every user.Or can i give some phone level locking security??Please help me out who ever had solved such problems.It will be a great help.

Hall of Fame Super Red

Re: security on IP phones

Hi Kumarjeet,

You can set up an individual Authorization Code for each of these individuals. This sounds like exactly what you need. Have a look;

You can use FAC for colleges, universities, or any business or organization when limiting access to specific classes of calls proves beneficial. Likewise, when you assign unique authorization codes, you can determine which users placed calls. For each user, you specify an authorization code, then enable FAC for relevant route patterns by selecting the appropriate check box and specifying the minimum authorization level for calls through that route pattern. After you update the route patterns in Cisco CallManager Administration, update your dial plan documents to define the FAC-enabled route patterns and configured authorization level.

Adding Forced Authorization Codes

After you design your FAC implementation, you enter authorization codes either in Cisco CallManager Administration or through the Cisco Bulk Administration Tool (BAT). Consider using BAT for large batches of authorization codes; the comma separated values (CSV) file in BAT serves as a blueprint for authorization codes, corresponding names, and corresponding levels. For future reference, make sure that you update your dial plan documents or keep a printout of the CSV file with your dial plan documents.

To add a small number of authorization codes in Cisco CallManager Administration, perform the following steps:



Step 1 In Cisco CallManager Administration, choose Feature > Forced Authorization Code.

Step 2 In the upper, right corner of the window, click the link, Add a New Forced Authorization Code.

Step 3 Configure the authorization codes by using the configuration settings.

Step 4 Click Insert.

Step 5 Repeat Step 2 through Step 4 to add all authorization codes.

Step 6 After you add all authorization codes, see the "Enabling Forced Authorization Codes for Route Patterns" section.

From this doc;

Hope this helps!


Please remember to rate helpful posts.....

CreatePlease login to create content