Error: DeviceTransientConnection - Transient connection attempt.
Connecting Port: 2000
Device name [Optional].: SEP000A8AA21228
Device IP address.: XXX
Device type. [Optional]: 8
Reason Code [Optional].: 1
App ID: Cisco CallManager
Cluster ID: CNB-CMSUB-Cluster
Node ID: XXX
Explanation: A connection was established and immediately dropped before completing registration. Incomplete registration may indicate a device is rehoming in the middle of registration. The alarm could also indicate a device misconfiguration, database error, or an illegal/unknown device trying to attempt a connection.
Recommended Action: No action is required if this event was issued as a result of a normal device rehome..
Any phones that were connected to the subscriber server were not able to make internal or external calls. All phones showed as registered in Call Manager. I looked and found the error listed, and it stated that if that service fails, it should connect to the secondary CM Server. Ours did not...When I shut down the CM service on the Primary CM, it did finally cut over. Any suggestions would be great.
