Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Selecting the right IOS image for MGCP gateway

Hi,

I'm setting up a 1751 router as an MGCP gateway w/ a VIC-2FXO card. I loaded a 12.3 IP/Voice+ image (c1700-sv3y-mz.123-2.T4), but it doesn't seem to have the CCM-Manager or MGCP global commands.

Do I have the right image? Or is there some command I need to enable these features? I have configured a VG-200, and I assume the commands are similar.

Thanks, Randy

2 REPLIES
Community Member

Re: Selecting the right IOS image for MGCP gateway

I believe you need the Vox feature set for the 1700 series.

Community Member

Re: Selecting the right IOS image for MGCP gateway

Thanks, I tried one of the VOX images (c1700-sv8y-mz.122-15.T11) with the same result:

Gateway(config)#mgcp

Gateway(config)#mgcp call-agent 192.168.0.5

Gateway(config)#mgcp dtmf-relay voip codec all mode out-of-band

Gateway(config)#ccm-manager

% Unrecognized command

I suspect that ccm-manager command might be changed.

Randy

106
Views
0
Helpful
2
Replies
CreatePlease to create content