I was wondering how i can adjust the date/time on the meetingplace express v 184.108.40.206 server. I tried setting the hwclock and rebooted but still came up with the wrong time. The clock on the server is 15 minutes fast.
Re: Setting the date and time in meetingplace express
Steps for setting up date and time:
On the Date and Time page, set the date and time for the system by following these steps:
In the Date box, select today's date. Click the left and right arrows to move to a different month or year.
In the Time box, set the hour, minute, and second to the current time.
(Optional) Enable NTP (Network Time Protocol). This lets your computer synchronize its clock with a remote time server using NTP. Check the box next to this option to enable NTP.
Note: Be sure you enter the correct date and time. You must reinstall the Cisco Unified MeetingPlace Express operating system and application if you need to change the date or time of your server in the future.
These are the paths to get to each CCX logs through CLI. They may be helpful if you are having issues accessing RTMT or downloading logs through it.
If you want to download them you have to prefix "file get " and you can add one of the options (re...