Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Simple IP Phone Service Issue

I am developing an IP Phone Service. I am creating a IPPhoneTextObject and have added several soft keys. This works fine, however, on the phone (7945), If I push one of the soft key buttons, the phone displays: "That Key Is Not Active Here"

Anyone have any ideas? I sincerely appreciate your time.

Michael

7 REPLIES

Re: Simple IP Phone Service Issue

Below is the XML that generates the menu:

IP Phone Service

Button Configuration...

Developed By M. Smith

Button1

http://10.1.0.75/Page2.aspx

1

Button2

http://10.1.0.75/Page3.aspx

1

Button3

http://10.1.0.75/Page4.aspx

1

Button4

http://10.1.0.75/Page5.aspx

1

New Member

Re: Simple IP Phone Service Issue

the notation is case sensitive, and the position is always the same in your code.

So replace all of the occurrences with (and obviously), and change the position valu to 1 to 4 instead of always 1 for all of the softkeys.

This way should work.

HTH,

Alberto

Re: Simple IP Phone Service Issue

Thank you so much for the reply. I greatly appreciate it. That was a typographical error on my behalf. Here's the current XML that is generated & I still recieve the same error.

IP Phone Service

Button Configuration...

Developed By M. Smith

Button1

http://10.1.0.75/Page2.aspx

1

Button2

http://10.1.0.75/Page3.aspx

2

Button3

http://10.1.0.75/Page4.aspx

3

Button4

http://10.1.0.75/Page5.aspx

4

Re: Simple IP Phone Service Issue

Outstanding! It was the fact that the 'Url' was not capitalized. I am greatfull for your help.

Cheers,

Michael

New Member

Re: Simple IP Phone Service Issue

Happy it helped :-)

Please rate the post.

Thanx,

Alberto

Re: Simple IP Phone Service Issue

Thank you sir! How do I rate this post? And I will be more than happy to do so,

Thanks,

Michael

New Member

Re: Simple IP Phone Service Issue

In the lower right part of the post you'd like to rate there's a dropdown list and a button.

From the dropdown select the vote, then click submit.

bye,

Alberto

134
Views
5
Helpful
7
Replies