cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3942
Views
0
Helpful
5
Replies

SIP 400 Bad Request

jamessohotha
Level 1
Level 1

I'm getting a bad request error when attempting to an outbound SIP call on a IP2IP gateway (H323 -> SIP).

It's a slightly odd configuration as we will only be using this route for outgoing calls only. The only error message I get is:

//-1/xxxxxxxxxxxx/SIP/Error/sipsdp_add_standard_lines: media_src_address is NULL; c-line is not added

SIP Invite message:

Sent:

INVITE sip:07970315632@192.168.1.2:5060 SIP/2.0

Via: SIP/2.0/UDP 192.168.1.1:5060;branch=z9hG4bK11222C

From: "anonymous" <sip:9000@192.168.1.1>;tag=404CF30-282

To: <sip:07970333333@192.168.1.2>

Date: Wed, 16 May 2007 13:09:44 GMT

Call-ID: 8CB2BA8E-2E511DC-8013CD38-94E8A35E@192.168.1.1

Supported: 100rel,timer

Min-SE: 1800

Cisco-Guid: 15103203-2971783453-520093696-2887190163

User-Agent: Cisco-SIPGateway/IOS-12.x

Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, COMET, REFER, SUBSCRIBE, NOTIFY, INFO, UPDATE, REGISTER

CSeq: 101 INVITE

Max-Forwards: 70

Remote-Party-ID: <sip:9000@192.168.1.1>;party=calling;screen=yes;privacy=full

Timestamp: 1179320984

Contact: <sip:9000@192.168.1.1:5060>

Call-Info: <sip:192.168.1.1:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"

Expires: 180

Allow-Events: telephone-event

May 16 13:09:44.608 UTC: //-1/xxxxxxxxxxxx/SIP/Info/HandleUdpSocketReads: Msg enqueued for SPI with IP addr: 192.168.1.2:5060

May 16 13:09:44.608 UTC: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportProcessNWNewConnMsg: context=0x00000000

May 16 13:09:44.608 UTC: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:

Received:SIP/2.0 400 Bad Request

Via: SIP/2.0/UDP 192.168.1.1:5060;branch=z9hG4bK11222C

From: "anonymous" <sip:9000@192.168.1.1>;tag=404CF30-282

To: <sip:07970315632@192.168.1.2>

Call-ID: 8CB2BA8E-2E511DC-8013CD38-94E8A35E@192.168.1.1

CSeq: 101 INVITE

User-Agent: 2N StarGate V-02.20.47

Allow: INVITE, BYE, ACK, CANCEL, OPTIONS

Content-Length: 0

Any ideas?

5 Replies 5

joncbanks
Level 1
Level 1

Hi

Have you found a solution to this? I'm getting the exact same SIP error message and we are also using a H323-to-SIP gateway.

However rather than getting a 400 error I am recieving a 480 error - Temporarily Unavailable.

I'm connecting to a Mitel PBX via a SIP trunk.

Afraid not, still working on it....

joncbanks
Level 1
Level 1

Hi

Have you found a solution to this? I'm getting the exact same SIP error message and we are also using a H323-to-SIP gateway.

However rather than getting a 400 error I am recieving a 480 error - Temporarily Unavailable.

I'm connecting to a Mitel PBX via a SIP trunk.

For what its worth, I had the same problem from Callmanager to an IOS IPIPGW. I was getting the SIP/2.0 400 Bad Request - 'Malformed/Missing Contact field' error message. Turns out I had mistyped my caller id mask and was sending characters in place of numbers. By correcting it, my problem went away.

Todd

jamessohotha
Level 1
Level 1

Made a mistake and the IOS version I am using doesn't actually support the IP2IPGW features.

Need to install more memory to get the 12.3T IOS it requires though...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: