Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

SIP CLID Intermittent

Hi

I am running a Cisco CCM 4.1(3)sr3b and IP2IP GW c2800nm-adventerprisek9_ivs-mz.124-8.bin

CCM -> SIP -> IP2IP GW - H323 (to Carrier)

It displays the CLID 60% of the time but the rest of time i get Unknown.

if i change to CCM - h323 - IP2IP GW - H323 to carrier it works fine.

I did want to try SIP all the way through but if i do that all calls after transfering them on get cut off after 15 seconds...

Thanks

Andy

1 REPLY
Silver

Re: SIP CLID Intermittent

For real-time, delay-sensitive traffic such as voice, it is better to deny network access under congestion conditions than to allow traffic onto the network to be dropped and delayed. Try this URL

http://www.cisco.com/en/US/products/hw/univgate/ps505/products_data_sheet09186a0080091e51.html:

95
Views
0
Helpful
1
Replies
CreatePlease to create content