05-20-2008 05:37 AM - edited 03-13-2019 05:16 PM
Hi,
i have a cisco 7204vxr router (c7200-is-mz.123-6f.bin)and on one of the networks (wich is a nat) there are sip clients connected to a sip server on another network. What is happening is that the router is acting as a ALG/SBC changing the sip/spd information inside the packets.Since i have another equipment doing SBC function, i would like to know how to disble it on the 7204vxr.I have searched a lot, but could not find and answer.
Thanks for your help,
André Santos
Solved! Go to Solution.
05-26-2008 04:24 PM
To disable it on 7204vxr you can use the following commands:
no ip nat service sip tcp port 5060
no ip nat service sip udp port 5060
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t8/feature/guide/ftnatsip.html#wp1031752
05-26-2008 04:24 PM
To disable it on 7204vxr you can use the following commands:
no ip nat service sip tcp port 5060
no ip nat service sip udp port 5060
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t8/feature/guide/ftnatsip.html#wp1031752
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: