04-01-2006 09:38 PM - edited 03-15-2019 04:14 AM
Hi,
I want to setup voip network to customer. which voip I have to implement SIP based or H.323 based.
If it is SIP what are the required equipments?
If if is H.323 what are the required equipments?
Regards
skrao
04-01-2006 10:22 PM
That's a very broad question, it usually gets one of those rtfm replies... what do you exactly mean by "setup voip network to customer"?
M
04-01-2006 10:35 PM
ok
then how to setup SIP based voip network to customer"?
04-02-2006 12:12 AM
Well the real question is what are you looking for. Are you trying to have a voip installed into your network so that you can make calls across the internet or your wan. Or is this VOIP network for a single location.
You need to give us a little more detail as to what your looking for.
Patrick
04-02-2006 04:37 AM
hi,
I will give full details. our customer having nearly 20 branches are connected to central office via leased lines.
And some branches are connected by internet.
Now customer willing to use voip on all these branches.
That is From central office to leased line offices and internet offices vice versa..
And one more thing, there are analog phones with PBXs.
Regards
skrao
04-02-2006 08:20 AM
That is good but there are still a lot unknown here,
what protocols the PBXs support,how many people in the branches?
You can use cisco call manager at the central site, and voice gateways like 2811 voice bundle+SRST, with the needed WIC module to connect to the PBXs.
The answer is general as the question.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide