Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

sip-ua gone from ios 12.3?

Hello group;

I was working with a 1750 running 12.2(23) IP VOICE PLUS. We wanted to upgrade to 12.3 GD, also IP VOICE PLUS. I noticed the sip-ua command is no longer available so the following config didn't work any more...

dial-peer voice 8111 voip

destination-pattern 8111

voice-class codec 1

session protocol sipv2

session target sip-server

dtmf-relay h245-alphanumeric

sip-ua

sip-server ipv4:4.14.205.15:5060

!

Any thoughts?

In the end we upgraded to 12.2 (37) IP Voice plus...

thank you

  • Other Collaboration Voice and Video Subjects
1 REPLY
Silver

Re: sip-ua gone from ios 12.3?

sip-ua commands seems to be supported in the 12.3 release, you may check out the command reference :

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_command_reference_book09186a00801a7f08.html

112
Views
0
Helpful
1
Replies