sip-ua problem for CUBE

[dsuntama]

Hi,

Anyone can help me,

I setup sip-ua but seems it doesn't work

voice service voip

allow-connections h323 to sip

allow-connections sip to sip

allow-connections sip to h323

!

sip-ua

registrar ipv4:195.190.166.249 expires 3600

credentials username user77932 password xxx realm sip.ticinocom.com

authentication username user77932 password 0 xxx realm sip.ticinocom.com

no remote-party-id

retry invite 2

retry register 10

registrar ipv4:195.190.166.249 expires 3600

sip-server ipv4:195.190.166.249

host-registrar

!

but when i

sh sip register status

it shown as per below

Line peer expires(sec) registered

================================ ========== ============ ==========

9* 1 21 no

900* 3 21 no

918* 2 21 no

0 0 no

I have no idea where do the 9*, 900* & 918* coming from.

And from the list i cannot see the connection under username user77932

Please advise

thanks

[Nicholas Matthews]

There are two places these will register from:

'dial-peer voice X pots' with a destination pattern

and

'ephone-dn' with number

If your provider is expecting you to register a number you would need to put it in a dial peer or ephone-dn. 'debug ccsip messages' to see how you're registering.

hth,

nick

[dsuntama]

Hi,

Thanks for the reply

I'm going to use CUBE with CUCM.

Is it needed to configure 'ephone-dn' ?

The provider is not expecting to register a number.

Kindly advise

[dsuntama]

attached is the debug