Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

sip-ua problem for CUBE

Hi,

Anyone can help me,

I setup sip-ua but seems it doesn't work

voice service voip

allow-connections h323 to sip

allow-connections sip to sip

allow-connections sip to h323

!

sip-ua

registrar ipv4:195.190.166.249 expires 3600

credentials username user77932 password xxx realm sip.ticinocom.com

authentication username user77932 password 0 xxx realm sip.ticinocom.com

no remote-party-id

retry invite 2

retry register 10

registrar ipv4:195.190.166.249 expires 3600

sip-server ipv4:195.190.166.249

host-registrar

!

but when i

sh sip register status

it shown as per below

Line peer expires(sec) registered

================================ ========== ============ ==========

9* 1 21 no

900* 3 21 no

918* 2 21 no

0 0 no

I have no idea where do the 9*, 900* & 918* coming from.

And from the list i cannot see the connection under username user77932

Please advise

thanks

3 REPLIES

Re: sip-ua problem for CUBE

There are two places these will register from:

'dial-peer voice X pots' with a destination pattern

and

'ephone-dn' with number

If your provider is expecting you to register a number you would need to put it in a dial peer or ephone-dn. 'debug ccsip messages' to see how you're registering.

hth,

nick

New Member

Re: sip-ua problem for CUBE

Hi,

Thanks for the reply

I'm going to use CUBE with CUCM.

Is it needed to configure 'ephone-dn' ?

The provider is not expecting to register a number.

Kindly advise

New Member

Re: sip-ua problem for CUBE

attached is the debug

725
Views
0
Helpful
3
Replies
CreatePlease login to create content