Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SIPv2 Problem

Hi All,

I am trying to use a couple of VoIP dial peers to connect 2 CME's. I thought this would be straight forward and configured 2 dial-peers below, although the remote phone rings, no speech is passed. This is probably something simple that I have missed having not done this before. I have temporarily opened up the remote firewall 200.140.175.226 to allow all UDP traffic until I understand the ports etc in detail.

dial-peer voice 3 voip

destination-pattern 5... (remote ext's)

session target ipv4:200.140.175.226

dtmf-relay h245-alphanumeric

codec g711alaw

no vad

dial-peer voice 99 voip

destination-pattern 1... (remote ext's)

session target ipv4:200.45.194.201

dtmf-relay h245-alphanumeric

codec g711alaw (UK)

no vad

Comments welcome!

Thanks

1 REPLY
New Member

Re: SIPv2 Problem

Please ignore! not an issue anymore

273
Views
0
Helpful
1
Replies
CreatePlease login to create content