Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Green

SNMP requests that work against 3.1(2c) fail against 3.1(3a)

Greetings folks,

Newbie alert.

This is my first post to this forum so take it easy on me if I'm asking a question that has already been answered. I searched and could not find any thing pertinent.

I'm looking at Network Management of VOIP networks and have an reasonable application that works fine against 3.1(2c) CCM and also an older 3.0 version. But when I point this at the 3.1(3a) CCM it fails.

I'll give you a simple example rather than describe the application and perhaps you can point me in the right direction.

For example, if I send this simple SNMP command towards a 3.1(2c) CCM:

/usr/local/bin/snmpget -m all geohplabpg1b.cup.hp.com public enterprises.cisco.ciscoMgmt.ciscoCcmMIB.ciscoCcmMIBObjects.ccmAlarmConfigInfo.ccmGatewayAlarmEnable.0

It returns with:

enterprises.cisco.ciscoMgmt.ciscoCcmMIB.ciscoCcmMIBObjects.ccmAlarmConfigInfo.ccmGatewayAlarmEnable.0 = true(1)

But against a 3.1(3a) CCM:

/usr/local/bin/snmpget -m all ws76082p.cup.hp.com public enterprises.cisco.ciscoMgmt.ciscoCcmMIB.ciscoCcmMIBObjects.ccmAlarmConfigInfo.ccmGatewayAlarmEnable.0

It fails with:

Error in packet

Reason: (genError) A general failure occured

Failed object: enterprises.cisco.ciscoMgmt.ciscoCcmMIB.ciscoCcmMIBObjects.ccmAlarmConfigInfo.ccmGatewayAlarmEnable.0

I know the agent is working because:

/usr/local/bin/snmpget -m all ws76082p.cup.hp.com public system.sysUpTime.0

returns with:

system.sysUpTime.0 = Timeticks: (6123) 0:01:01.23

Is there some way to validate the situation in the agent?

Regards,

Geoff Thompson

1 REPLY
Green

Re: SNMP requests that work against 3.1(2c) fail against 3.1(3a)

Hi,

I hate to reply to my own message but here is a little more data. Instead of a focussed SNMP get I'll just walk the MIB starting at enterprises ...

/usr/local/bin/snmpwalk -m all ws76082p.cup.hp.com public enterprises

enterprises.cisco.ciscoMgmt.23.1.1.1.1 = NULL

enterprises.cisco.ciscoMgmt.23.1.1.1.1.1.2 = 2

enterprises.cisco.ciscoMgmt.23.1.1.1.1.2.2 = 1

enterprises.cisco.ciscoMgmt.23.1.1.1.1.3.2 = 60

enterprises.cisco.ciscoMgmt.23.1.3.1.0 = 1

enterprises.cisco.ciscoMgmt.23.1.3.2.0 = 60

enterprises.cisco.ciscoMgmt.23.1.3.3.0 = 180

enterprises.cisco.ciscoMgmt.23.1.3.4.0 = "ws76082p"

Error in packet.

Reason: (genError) A general failure occured

Failed object: enterprises.cisco.ciscoMgmt.23.1.3.4.0

Could this be a bug in the extensions to the SNMP agent. The walk is fine on all the other Call Managers.

Regards,

Geoff Thompson

248
Views
0
Helpful
1
Replies
CreatePlease to create content