Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

some trunking questions..

here's what I want to do..

i have a t1 to remote1.. and a t1 to remote2..

serial 2 connects to a csu/dsu which connects to a phone system.. i want to use channels 1-12 on the first t1.. and 13-23 on the second.. i think this is what you'd call a t1 cross-connect to the phone system.. is this possible?

1 REPLY
Cisco Employee

Re: some trunking questions..

First of all, 13-23 = 11 channels and 1-12 = 12 channels. You can only cross-connect an identical number of channels, but they can be on any channel number.

You didn't specify what platform you are using, so I will assume for the sake of discussion that you have a 2600/3600 platform. Yes, you can do this using a VWIC-2MFT-T1 card.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t3/dteadi3t.htm

89
Views
0
Helpful
1
Replies
CreatePlease to create content