Is their a way to provide a sequential hunt group that will also provide forward on busy and foward no answer (based on a timeout value) to the next avialable extension in the group (a group being five or more members)? I have used the alias command in the past, but seems to be limited on what can be configured.
SRST does not have the hunt group feature, but Callmanager express has it.
In the new release of Callmanager express, CME 4.0, there is a feature called SRST fallback support using CME. You can use hunt groups in the SRST mode of CME.
Excerpts from CME admin guide.
When Cisco Unified SRST functionality is provided by Cisco Unified CME, provisioning of phones is automatic and most Cisco Unified CME features are available to the phones during periods of fallback, including hunt-groups, call park and access to Cisco Unity voice messaging services using SCCP protocol.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...