Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Super Bronze

SRST Config

Hi

Anyone know if it's possible to configure hunt groups in SRST?

And if it is, is it possible to do it using a H323 gateway?

When in H323 mode, does any configuration hunt groups and so on cause other problems (like things matching dial-peers other than the ones that point to CallManager whilst in non-SRST mode)?

I'm thinking mainly of a site which (for example) has each phone with a DDI (no problem there), and a main number which would normally go to a CallManager hunt group or other queue... in SRST mode, is it possible to have a hunt group configured?

Thanks

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
2 REPLIES
New Member

Re: SRST Config

I've achieved sequential hunt group functionality in SRST by using the alias command

call-manager-fallback

no huntstop

alias 1 7777 to 7701 preference 1

alias 2 7777 to 7702 preference 2

alias 3 7777 to 7703 preference 3

alias 4 7777 to 7704 preference 4

alias 5 7777 to 7705 preference 5 huntstop

-PMK

Bronze

Re: SRST Config

aaron,

virtuell numbers or hunt-groups (same as callmanager, with routing options such longest idle etc.) are not possible in srst, but you can configure alias or dialplan-pattern for numbers (pilotpoint etc) that can not fall in srst mode.

greetings

mehmet

192
Views
0
Helpful
2
Replies
CreatePlease to create content