Hi all,
I´m trying to set up a MGCP Gateway with SRST.
The failover from Callmanager to the Gateway in principle works fine and outgoing calls in SRST-operation mode is also ok. My problem is the inbound calls are not routed properly. I´ve problems with stripping of the extension and to route the call to the appropriate IP-Phone.
The SRST-Part of my config looks like the following:
call-manager-fallback
secondary-dialtone 0
max-conferences 8
transfer-system full-consult
user-locale DE
limit-dn 7910 1
limit-dn 7935 1
limit-dn 7940 1
limit-dn 7960 1
ip source-address 10.61.1.23 port 2000
max-ephones 48
max-dn 92 dual-line
system message primary SRST Telefon Notbetrieb
system message secondary Telefon Notbetrieb
dialplan-pattern 1 1234.. extension-length 2
transfer-pattern ..
keepalive 60
default-destination 15
alias 1 12340 to 15
moh music-on-hold.au
time-format 24
date-format dd-mm-yy
I´d appreciate any hint
Thanks in advance
