Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SRST on an MGCP-Gateway

Hi all,

I´m trying to set up a MGCP Gateway with SRST.

The failover from Callmanager to the Gateway in principle works fine and outgoing calls in SRST-operation mode is also ok. My problem is the inbound calls are not routed properly. I´ve problems with stripping of the extension and to route the call to the appropriate IP-Phone.

The SRST-Part of my config looks like the following:

call-manager-fallback

secondary-dialtone 0

max-conferences 8

transfer-system full-consult

user-locale DE

limit-dn 7910 1

limit-dn 7935 1

limit-dn 7940 1

limit-dn 7960 1

ip source-address 10.61.1.23 port 2000

max-ephones 48

max-dn 92 dual-line

system message primary SRST Telefon Notbetrieb

system message secondary Telefon Notbetrieb

dialplan-pattern 1 1234.. extension-length 2

transfer-pattern ..

keepalive 60

default-destination 15

alias 1 12340 to 15

moh music-on-hold.au

time-format 24

date-format dd-mm-yy

I´d appreciate any hint

Thanks in advance

  • Other Collaboration Voice and Video Subjects
1 REPLY
Bronze

Re: SRST on an MGCP-Gateway

use the num-exp command. Like this:

num-exp 7035551212(did) 4545(extension)

Geoff

123
Views
0
Helpful
1
Replies
This widget could not be displayed.