I would like to know if there is a time frame for dropping support for Unity 2.4.6 integration with upcoming versions of Cisco Call Manager. <br><br>Our company currently uses 2.4.6 as a standalone voice mail server, since we have no need for viewmail or unified communications. However, we plan on continuing to upgrade the software on the CCM cluster. Is there a "cut off" point for supporting the integration of Unity 2.4.6 with upcoming versions of Call Manager? <br><br>We would like to be able to plan accordingly if we will be forced to upgrade to a higher version of Unity in order to maintain the current functionality. Thank you,<br><br>Jorge Figueroa<br><br>
Re: Support roadmap for Unity 2.4.6 with future CCM
Currently the plan is to continue supporting 2.4.6 with each TSP release (we release new TSPs to make sure Unity can "talk" to various versions of CM). There are no plans at the present to cut off support for 2.4.6.
Here's the master matrix for supported versions of CM, TSP and Unity so you can check up on if a version of CM you want to jump to requires an updated TSP you need to obtain from us or not:
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...