Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Supported Server list

I have looked at the supported server list and am wondering why there are no Dell rack mount options. The specs on a 2650 is not much different than the DL 370's and 380's. I am looking to upgrade a 12 port (D120/JCT-LS) to Unity 4.03 from 2.46 that is currently on the Optiplex G1. The customer wants to use Dell but does want a rack mount with a smaller form factor. Is the reason the PCI slot configuration on the Dells? What kind of PCI slot works for the D120/JCT-LS? Thanks in advance.

  • Other Collaboration Voice and Video Subjects

Re: Supported Server list

The same question came up internally not so long ago...

Historically we have taken measures to extend HCL acceptance of "sibling" servers to qualified servers, when equivalence across the range of HCL servers is roughly level. This was not possible with the PE2650 though, nor the PE2550 before it.

The PE2650 is entirely a separate design from the PE2600 (as were the PE2550 and PE2500 before them). Disclosure from Dell Engineering confirmed this prompting the decision to select the PE2600 only.

Since the PE2650 would require an entire certification to be preformed we evaluated where it would fit in our portfolio. Because of its limited PCI space it could not support large TDM integrations. Therefore we made the decision not to support the PE2650 entirely and focus on other platforms which would better match the needs of the masses.



This widget could not be displayed.