Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

switch version from 5.1(1b) to 5.1(3c) failed

Hi,

I have a publisher and a subscriber running version 5.1(1b).

First I had upgraded publisher version 5.1(1b) to 5.1(3c) with patch cisco-ipt-k9-patch5.1.3.4000-4.tar.gz.sgn publisher successfully booted with 5.1(3c) version. After that I started up-gradation of subscriber with same patch, but after reset subscriber booted with old version that is 5.1(1b).

In inactive partition of subscriber I can see new version 5.1(3c) and in active partition I can see 5.1(1b).

I had tried to boot sub with new version that is 5.1(3c) through cli (utils) command also but it's booting with old version that is 5.1(1b).

Can any one help me how to resolve this problem?

Thanks & Regards,

Nishit

  • Other Collaboration Voice and Video Subjects
2 REPLIES
Cisco Employee

Re: switch version from 5.1(1b) to 5.1(3c) failed

ok, if i'm getting this right you did the procedure wrong

if you installed patch on PUB, RESTARTED with new version BEFORE YOU INSTALLED ON SUB that is wrong

you need to go back to the original version, install patch on BOTH SERVERS WITHOUT REBOOTING and then reboot PUB in order to switch versions, wait a couple of minutes while everything initializes and then reboot SUB to switch versions

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: switch version from 5.1(1b) to 5.1(3c) failed

\Hi,

By mistake i wrote that i had restart the pub first then i started up-gradation on sub and switch version.

I did up-gradation on pub and sub simultaneously and first reboot pub after that i had reboot sub.

Pl let me know what could be the problem.

Regards,

Nish\\\\\\\\\\\\\\\\\\\\\<\\

113
Views
0
Helpful
2
Replies
This widget could not be displayed.